×
The automatic screw row unit is mainly responsible for screw screening, arrangement, material distribution, transportation and other processes. It is an important link instead of manual screw removal. Locking mechanism the locking mechanism performs the screw tightening action according to the program setting through the configured electric batch, air batch or servo motor, which completely replaces the manual operation
1. Two screw drivers can operate and lock 2 screws at the same time to improve efficiency.
2. The device has its function as fewer worker to load and unload in the assembly line, which can save labors
| Models | XY-SC9705 | XY-SC550S |
| Working area X*Y*Z*R(mm) | X1/X2:730*YI/Y2:900*Z1/Z2:100mm | X1/X2:400*Y1/Y2:700*Z1/Z2:80mm |
| Moving speed (mm/s) | X/Y≤500mm/s, Z≤300mm/s | |
| Drive mode | Stepping motor +straight guide/servo motor +ball screw(altermative) | |
| Location accuracy | ±0.01~0.03mm | |
| Control system | Moving controlling and teach pendant | |
| Screw transmission method | Suction mode/blow mode (alternative) | |
| Electric screwdrver | 2pc (altermative） | |
| Screw feeder | 2 sets | |
| Full-voltage | 220V 50HZ | |
| Operating temperature | 5-40℃ | |
| Operating humidity | 20-90% no condensation | |
| Air pressure | 0-0.8MPa | |
| Dimension W*D*H(mm） | 1235*1080*780 | 1070*700*800 |
| Weight | around 220kg | around 150kg |
